PBT 杜邦 XMB7930F BK507

牌号分类
GRADE PHYSICAL PROPERTY

品种：PBT丨XMB7930F BK507

生产企业：杜邦

• 规格用途

• 规格级别	其它 其它 注塑	外观颜色
  该料用途
  备注说明

• 技术参数

• 性能项目			试验条件[状态]	测试方法	测试数据	数据单位
  物理性能	收缩率		平行流动方向	ASTM D955	0.016	cm/cm
  	收缩率		垂直流动方向	ASTM D955	0.016	cm/cm
  机械性能	弯曲模量		90 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant	ASTM D790	331	Mpa
  	弯曲模量		（-40 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant	ASTM D790	3000	Mpa
  	弯曲模量		23 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant	ASTM D790	2410	Mpa
  	弯曲模量		149 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant	ASTM D790	234	Mpa
  	弯曲强度		90 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I	ASTM D790	13	Mpa
  	弯曲强度		（-40 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I	ASTM D790	120	Mpa
  	弯曲强度		23 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I	ASTM D790	80	Mpa
  	弯曲强度		149 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I	ASTM D790	8	Mpa
  	断裂点伸长率	-	90 °C, 0.00 mm, Compression Molded, Type I	ASTM D638	300	%
  		-	-40 °C, 0.00 mm, Compression Molded, Type I	ASTM D638	11	%
  		-	23 °C, 0.00 mm, Compression Molded, Type I	ASTM D638	300	%
  		-	150 °C, 0.00 mm, Compression Molded, Type I	ASTM D638	300	%
  	非缺口冲击强度	-	-40 °C, 0.00 mm	ASTM D256	No Break	J/m
  		-	23 °C, 0.00 mm	ASTM D256	No Break	J/m
  热性能	熔点			DSC	225	℃
  	阻燃性	-	3.00 mm	UL94	HB
  		-	1.5mm	UL94	HB
  		-	0.81mm	UL94	HB
  其它性能	极限氧指数		3.20 mm	ASTM D2863	22	%

PBT 杜邦 XMB7930F BK507